Dual action:
1. Fight against the encrustation of dissolved metals, in particular those based on iron, copper or manganese
2. Prevents lime deposits
FEATURES
• Also prevents lime deposits
• High speed action
• Does not contain phosphates
• Does not modify the pH of the treated water
• Compatible (in solution) with the PHMB system
• Compatible with all filtration equipment
• Non-foaming at recommended dosages
• Recommended in combination with quaternary ammonium-based algaecides.
• The disappearance of tartar deposits is gradual and is only actually observed after a fortnight. Gradually, the coating and the equipment in contact with the treated water must gradually lose their roughness.
• Metal stains disappear by sequestering the metal ions responsible for the problem. This is gradual and is only noticeable after a fortnight or even longer.
• May cause a drop in the chlorine content of the water.
METAL STOP METAL SEQUESTRANT 3L - HTH
Instructions for use
Precautions for use
Make sure the filtration is on.
Distribute the product as close as possible to the water, opposite the backflows if there are any.
Provide 40 ml per m³ of water during the first use on a pool that has never been treated.
Thereafter, add the product, on a regular basis, depending on the new water supply, respecting the same proportion of 40 ml per m³ of water added.
The presence of this product in the pool is likely to disturb the analysis of the chlorine or bromine content with the DPD 1 or DPD 4 tablets.
For a dissolved metal content greater than 1 mg/l, double the dosage.